Photo Gallery

Tile cleaning and acid wash

Demonstrating the importance of filter cleaning and why you should replace your pool or spa filter

Replumbing suction and return side painted and labeled

New Triton II sand filter installed on existing plumbing

The sun-rotted backwash valve handle broke when we tried to backwash it. This picture is of the old piston and the new one, ready to install!

Backwashing a sand filter. Notice how much dirt it trapped!

Want to heat your pool? Add a heat pump for maximum enjoyment and energy savings!

To make sure this heater was working, we needed to verify all the components in the safety circuits were operating properly. This customer was hot-tubbing in no time!

Verifying equipment schedules on this customers Aqualink RS8. The automation said the spa was 102 degrees, but the water temperature was 91 degrees, so we troubleshot it to a bad water sensor within minutes!

A rat had moved in & chewed through the pilot ignitor in this heater. Pack rats do love pool and spa heaters!

How much can a variable speed pump save you? Which one is best for you? Examine this chart to see how your current pump matches up! Call us with any questions on how a variable speed pump can save you HUNDREDS OF DOLLARS each year!

This customer’s hi-limit switch had failed and was preventing the heater from turning on. A quick service call & some parts and it was hot tub time!!

Neglecting maintenance allowed a severe leak to develop at this customers equipment pad. Some inexpensive parts were all that were required.

Before photo of a pebble tec repair to the rolled bond beam of the pool.

Before photo of a pebble tec repair to the spillway of a spa.

After photo of a pebble tec repair to the rolled bond beam of the pool.

After photo of a pebble tec repair to the spillway of a spa.

This spa needed a new anti-entrapment drain cover installed to protect the swimmers. Keep those little ones safe around the water!

Resealed the trough on this water feature to seal up a leak.

Before fiberglassing the inside of this old bowl water feature to prevent it from leaking.

After fiberglassing the inside of this old bowl water feature to prevent it from leaking.

First pic: sun-rotting & high pressures caused the filter to crack in these 2 pictures. We replaced the top tank & cleaned the filter. Right as rain now!

Second pic: sun-rotting & high pressures caused the filter to crack in these 2 pictures. We replaced the top tank & cleaned the filter. Right as rain now!

First of two pics: Whoever serviced this pool before Precision Aquatics did not know how to properly install a shaft seal. This pump was leaking like crazy!

Second of two pics, close-up: Whoever serviced this pool before Precision Aquatics did not know how to properly install a shaft seal. This pump was leaking like crazy!

This customer’s heater bypass gate valve had broken in the open position and couldn’t heat the spa. We re-plumbed the PVC with a new ball valve. (Before)

This electric heater element is toast! But a new one had the customer hot tubbing in no time!

This customer’s heater bypass gate valve had broken in the open position and couldn’t heat the spa. We re-plumbed the PVC with a new ball valve. (After)

Half way through a DE filter cleaning. A MUST to keep your pool running efficiently and problem-free!

Pic 1 of 2 - We plumbed in an energy & money saving variable speed pump for this customer. Connecting it to the automation system was no problem!

Pic 2 of 2 - We plumbed in an energy & money saving variable speed pump for this customer. Connecting it to the automation system was no problem!

Pic 1 of 4 - This customer’s infloor heads had stopped working. Rebuilding the actuator with a new internals kit got them back in business!

Pic 2 of 4 - This customer’s infloor heads had stopped working. Rebuilding the actuator with a new internals kit got them back in business!

Pic 3 of 4 - This customer’s infloor heads had stopped working. Rebuilding the actuator with a new internals kit got them back in business!

Pic 4 of 4 - This customer’s infloor heads had stopped working. Rebuilding the actuator with a new internals kit got them back in business!

Pic 1 of 2 - This customers salt system stopped working when the circuit board got fried - a common occurrence! We replaced the board with no problems!

Pic 2 of 2 - This customers salt system stopped working when the circuit board got fried - a common occurrence! We replaced the board with no problems!

Watch out for scorpions!!

Pic 1 of 2 - This filter definitely needed to be cleaned!! Before and after of cartridge replacement. Cartridges last an average of 18-24 months. Have your those filters cleaned to keep everything running right!

Pic 2 of 2 - This filter definitely needed to be cleaned!! Before and after of cartridge replacement. Cartridges last an average of 18-24 months. Have your those filters cleaned to keep everything running right!

Pic 1 of 2 - Dust storms can turn your swimming pool into an outdoor mud pit! If you get in a jam, give us a call!

Pic 2 of 2 - Dust storms can turn your swimming pool into an outdoor mud pit! If you get in a jam, give us a call!

Pic 1 of 2 - This customer lost the ability to turn on one of their pumps. We traced it to a burnt out relay in the automation system. Sometimes when the pump stops working, it’s not the pumps fault!

Pic 2 of 2 - This customer lost the ability to turn on one of their pumps. We traced it to a burnt out relay in the automation system. Sometimes when the pump stops working, it’s not the pumps fault!

Freshen up your backyard by fixing your kooldeck chips, cracks & even change to a new color! Remember, this is all you see when your in the pool.

Keep an eye on your rolled bond beams for cracks and delamination. If you have a section that is loose, cracked or completely broken off, give us a call to fix it!

This customer started leaking a lot of water when the unitherm governor failed on his heater. Fortunately, we caught it on his weekly pool service visit. Catastrophe averted since this equipment set was below the spa!!

This heater stopped working when the pressure switch failed. Replacing it and wiring the new one into the electrics got this heater back up and running in no time!

Has your pool or spa light stopped working? Save yourself a service call and check the GFI. If that doesn’t fix it, give us a call!!

These filters are due to be replaced! A tell-tale sign is when the banding starts to let go of the cartridge. Call us to clean YOUR filter!!

To get this customers infloor system back up and running, we needed to replace the modules inside these water valves. This was A LOT cheaper than plumbing in new water valves!

This customer didn’t want to replace the entire pump, but because of Title 44 in Arizona (all filter pumps installed after 2012 must be variable speed), we installed just a variable speed motor. Saved the customer hundreds over a complete new pump.

We pulled a new pool light into this customers pool and wired it up to the existing X-10 system so they could control the pool light by remote.